Concrete slab measurement sheet
Record one rectangular concrete region with a specified uniform thickness. Print this page at 100% on A4 or Letter, then fill it in on site.
Measure concrete only, excluding the sub-base. L and W run between inside form faces; t runs from the prepared base to the specified top of concrete. Mark where each depth check was made. If thickness or shape varies, split the area into separately recorded regions. This sheet records measurements and does not choose a structural thickness or calculate a quantity.
- Project / location
- Space to write
- Date / measured by
- Space to write
- Units for L and W: mm / cm / m / ft + in (circle one)
- Space to write
- L — horizontal inside length, A → B
- Space to write
- W — horizontal inside width, A → D
- Space to write
- t — specified concrete thickness; unit
- Space to write
- Thickness checks: positions / readings / unit
- Space to write
- Number of identical regions
- Space to write
- Specified thickness source / drawing reference
- Space to write
Irregular areas, changes in depth and site notes
Use these measurements in the slab guide
pro2.tools/en/concrete/slab-measurement-sheet/